REFERENCES

1. Williams DF. Definitions in biomaterials. Amsterdam - Oxford - New York Tokyo, Elsevier; 1987:24.

2. Boston Scientific Corporation or its Affiliates, All rights reserved, USA;. 2012.

3. Benjamin EJ, Virani SS, Callaway CW, Chamberlain AM, Chang AR, et al. Heart disease and stroke statistics 2018 update: a report from the American Heart Association. Circulation 2018;137:e67-492.

4. David Chua SN, Mac Donald BJ, Hashmi MSJ. Finite element simulation of stent and balloon interaction. J Mater Process Tech 2003;143:591-7.

5. Pericevic I, Lally C, Tonner D, Kelly DJ. The influence of plaque composition on underlying arterial wall stress during stent expansion:The case for lesion-specific stents. Med Eng Phys 2009;31:428-33.

6. Garg S, Serruys PW. Coronary stents: Current status. J Am Coll Cardiol 2010;56:S1-S42.

7. Yusuf S, Zucker D, Peduzzi P, Fisher LD, Takaro T, et al. Effect of coronary artery bypass graft surgery on survival: overview of 10-year results from randomised trials by the Coronary Artery Bypass Graft Surgery Trialists Collaboration. Lancet 1994;344:563-70.

8. Hanawa T. Materials for Metallic Stents. J Artif Organs 2009;12:73-9.

9. Ortega-Martínez J, Farré-Lladós M, Cano-Batalla J, Cabratosa-Termes J. Polyetheretherketone (PEEK) as a medical and dental material. A literature review. Med Res Arch 2017;5:1-16.

10. Guo YT, Chen SG, Wang J, Lu BH. Medical Application of Polyether ether ketone. Transl Surg 2018;3:12-6.

11. Pargaonkar SS, Prabhune MS, Patil VV, Deshpande PA, Kolhe VN. A Polyaryletherketone Biomaterial for use in Medical Implant Applications. Inter J Sci Res Pub 2015;5:1-3.

12. Sagomonyants KB, Jarman-Smith ML, Devine JN, Aronow MS, Gronowicz GA. The in vitro response of human osteoblasts to polyetheretherketone (PEEK) substrates compared to commercially pure titanium. Biomaterials 2008;29:1563-72.

13. Craig B. Open stent design. Westinghouse Drive Fremont 2012; doi: 10.6084/M9.FIGSHARE.95614.

14. Eshghi N, Hojjati MH, Imani M, Goudarzi AM. Finite Element Analysis of Mechanical Behaviour of Coronary Stent. Proced Eng 2011;10:3056-61.

15. VICTREX®, The mechanical properties of PEEK 450G medical document data is considered as per room temperature. 2014:1-4.

16. Kumar V, Ramesha CM. Non-linear bending analysis on stent materials used as cardiovascular implants. 2017;4:48-51.

17. Schiavone A. Computational modeling of stent deployment and mechanical performance inside human atherosclerotic arteries. Thesis 2015.

18. Schiavone A, Qiu TY, Zhao LG. Crimping and deployment of metallic and ploymeric stents-finite element modelling. Vessel Plus 2017;1:1-10.